Edge. Online MIDI Sequencer 
 
 User Guide 
 
 
 Introduction 
 ------------------- 
 
 For successful work you will need Apple QuickTime, and one of the browsers, Firefox 3, Chrome or Safari. 

 Opera will have some troubles in default configuration. You should go to "opera:config" page, 
 then check out and set the following preferences: 
  - opera:config#UserPrefs|AllowScriptToReceiveRightClicks : true
  - opera:config#UserPrefs|AllowContextMenus : false  
 
 Sound card and headphones must be configured, connected and bring signs of life. 
 And do not forget about the Internet. Our Sequencer is a web application. 

  
 Getting Started
 ----------------- 
 Put the cursor into an area of grid and click the right mouse button. 
 
 A brick called Note will appear in the Grid. Hover your mouse on it, the cursor will change to "drag". 
 
 At this point, press the left mouse button and drag a note, it will change its position. 
 
 To release the button, note remains in the new position and is aligned on a grid 
 in accordance with the Grid Snap ( "bind to the grid), which is set to the right column settings. 
 
 Now you have the score and you can hear it. 
 To do this, click Render. 
 
 You must wait about 2-5 seconds, and then to tune up the melody player. 
 
 To scroll the grid in the field of "grid scroll" need to pull your mouse over the white slider. 
 
 
 
 Project Settings 
 ------------------ 
 Click "Project" to display "Project Settings" tab if you don't see it. 
 
 The Tempo suitable values is from 20 to 200. 
 
 When you disclose a list of Track (track), you can choose any of 16 tracks. 
 
Each of them by default, assigned an "Instrument" : "Piano", 
 except track 10: it will always sound Drums. 
 
 You can assign any instrument from a list of "Instrument" to any track other than the 10th. 
 To do this, first choose a track from the list of "Track", but then the Instrument from the list of "Instrument". 
 
 
 Editing 
 --------------- 
 Choose a track 10 on the list of "Track", a list of tools will be unavailable. 
 Notes of the previous track will fade to gray. 
 
 Now, put a note in the Grid, and then move it up and down. 
 
 When the note is added or dragged, it appears the red line with the position-number of the Note. 
 And for track with Drums there is also the name of the selected sound. 
 When dragging a note of Drums in the vertical the name of the sound changed to an appropriate tip. 
 
 You can right-click over any note and then it stops its dragging, 
 instead, it will change its duration. 
 
 In this mode, the cursor has a different view: "resizing". 
 To go back to drag the notes you need to click on a Note again  with the right mouse button. 
 
 To delete a note, you need to select a Note's drag mode, the cursor is a cross. 
 Drag a Note out of the Grid, and it will disappear. 
 
 Changing the duration of all the Notes also depends on the value of the "Grid Snap". 
 
 When you switch tracks in the list of "Track", notes of the previous track fade, 
 then the Notes of the selected track display, if they exist. 
 
 You can edit can both. After that you choose some other track, 
the notes will hide (but not be removed), 
and those that were active will fade to gray. 
The Notes of choosen track will show  if they are there. 
 
 All the Notes are not removed if you do not remove them, they are hiding and showing. 
 Do not make any sense to show all the tracks in the grid. 
 Simultaneous editing is usually a 2 tracks. 
 
 
 
 Saving and loading projects 
 -------------------------------- 
 Open the tab "In-Out". 
 
 Saving a project.
  - Click "Save", the text box above the button to fill the code. 
  - Gently place your cursor in the box with code and not editing, press Ctrl + A, then Ctrl + C. 
  - Open Notepad and press Ctrl + V. Save the text file with the data of the project. 
 
 Loading a project. 
  - Place your cursor in the text box of "In-Out" tab, cleanse it using the sequence Ctrl + A, Del. 
  - Then open Notepad with a saved project, and no editing, press Ctrl + A, Ctrl + C. 
  - Place the cursor in the text box cleared tabs In-Out, and press Ctrl + V. 
  - Then click Load. 
 
 There will be the new data in the Grid. 
 To listen to the project, click Render. 
 
 
 WARNING! When loading the project data in the sequencer will be replaced with new! 
 
 
 
 
 
 
 
 
 
 Have Fun! 
 
 Max D 
 3 June, 2009 
 
 
 http://edge.jetwave.ru/